|
|
 |
SOLAR CHARGER |
 |
|
The multifunctional digital charger is applicable to many digital products such as mobile phones, digital cameras, DV,MP3,MP4，and so on.
*Wide applicability. The solar charger can charge different types of digital products since its output voltage is adjustable.
*Multifunction. Other than charging, the digital charger can also be used as a FM radio, flashlight and ultraviolet light.
*Large capacity, but small volume.
*The protection system is designed perfectly, to protect your expensive digital products
*High circulation life-span: Greater than 500 times.
* Human-based design: Fine rope, Environmental Protection stuff
* Security guarantee: There is not any danger to use
Use explain 一：
The explanation of the product on all sides
1： frontispiece
⊙DC 0UT: Charge output. It can connect 3.5mm round head(1.1mm inner core)
Choose the right adapter and insert in the hole with words “DC OUT”. Then connect with the mobile phone or other digital products that need charging.
⊙OUT L: When charging, the signal will be on
⊙OUT H: When charging, the signal Output status
⊙USB DC IN DC into charger
⊙IN PUT: indicator light
⊙IN OK: Full battery show light
⊙VOL: FM radio power and Volume
⊙EAR: Earphone output（3.5mm）
⊙FM: FM radio working light
⊙SCAN: Radio scan
⊙RESET: Radio reposition
2： nearside
⊙Hang line
⊙5.5V OFF 9V:Please choose the right voltage which is suitable for your different electronic products.
3： starboard
⊙U OFF W: W- LED light U-ultraviolet light
Turn the switch to the direction of “W”, then the LED light will be on for illumination. If turn the switch to the direction of “U”, the ultraviolet light will be on.
1： frontispiece
⊙DC OUT: Connect to the electronic devices. Firstly, set the Output Voltage switch to the right voltage level of your electronic devices. Next, select the right connector for your device. The indicator will turn red. When the electronic device is fully charged, the indicator will become green. When choose different voltage and connect with electronic equipment to charge, it is normal that the indicator appear red and green light in turn.
⊙USB DC IN: Connect the charger with a computer ,auto power supply adapter or power supply(5.5V/5V) adapter through a USB cord.Tthe red indicator is on, which means charging is under way; The indicator turns green when the charger is fully charged.
⊙VOL: VOL is the switch of FM radio.
Put the earphone into the hole with sign “EAR” and switch the knob with sign “OFF” so that it is turned on and sounds can be heard. Turn the knob to adjust the volume.
Then press the “RESET” button once, the signal will automatically go back to the low-end frequency. Radio frequency will automatically stop at the low end of 88MHZ.By pressing the SCAN button for three seconds, the signal searching will start automatically from low-end of 88MHZ towards high-end of 108MHZ. By pressing the SCAN button for once, it seeks automatically the next signal in a 200KH interval.
2： nearside
⊙Hang line: The position for hang the rope
⊙5.5V OFF 9V: Turn on the charger and choose the right Voltage which is suitable for your mobile or digital products. Please set the Control switch to "OFF" when not charge.
⊙ 1.1USB OUT: Charge output.
It is same to “DC OUT”. Turn on the charger and choose the right Voltage which is suitable for your mobile or digital products. When choose the different voltage and connect with electronic equipment to charge, it is normal that appear red and green light in turn.
3： starboard
⊙U OFF W: W-Flashlight, U-ultraviolet light
4： Solar panel
Keep the solar panel side of the charger facing the upright sunlight so that it can shorten the charging time.Attentions:
*Choose the right output voltage and adapter when charging.
*Don't irradiate body with ultraviolet light
*Keep it away from high temperature and moist places in order to avoid explosion and moisture.
*Keep away metal and smeary fittings
Speculations:
1. Solar panel specification: multi-crystalline silicon , 5.5V/110mA
2. The built-in rechargeable polymer lithium ion battery: 1900Mah/3.7V
5. Output voltage: 5.5V/9V
5. Output current: 350 - 1000mA
6. Input voltage: 4.5V-5.5V
6. Input current: 350-500mA
7. Dimension: 93*62*14mm
8. Weight:
8. Time for charging the built-in battery through solar energy: about 17 hours
9. Time for charging the built-in battery through DC: about 3.8 hours
10.Color:
Accessories:
Connecting adaptors for brands mobile phones(five)
DC adapter (one)
5PIN USB cable
Flexible Cable(one)
Earphone string
Hang rope
The materials of our product meet the international standards, past many strict items and quality test.
(You must go over the instruction before use it).
|
|
